Seal Applications - Rigid Indoor Displays

This is one of the most popular methods of producing a sign or display. Rigid Indoor Displays are used at point-of-sale, trade fairs, shopping centres, in fact anywhere. The SEAL Rigid Indoor Display System consists of a low reflectance laminate for protection of the print and a general purpose adhesive, which mounts the print to foam board or other suitable substrate of your choice.

How to Produce
This application requires a two pass process through a roller laminator, using an overlaminate, a mounting adhesive and a substrate eg. Foamboard.

Application Media Suitability
1. Inkjet prints
2. Photographic
3. Litho prints

Using a SEAL roller laminator
1. Apply adhesive and overlaminate to the image to create a decal (sticker)
2. Mount to substrate
3. Trim to size

 

Recommended SEAL materials: Inkjet Coated Media Solution

 Top (Overlaminate)
 Inkjet Print
 Bottom (Adhesive)
 Substrate

 

 Hot

 Cold

As an exciting alternative to the SEAL recommended rigid display recommendations it is now possible to print directly to self adhesive vinyl films using dye and solvent ink printers. Once printed the images may be applied to a substrate, such as foam board, to create a highly durable graphics panels for indoor applications.

How to Produce

Load vinyl into printer (check SEAL recommendations)
Print to vinyl (check SEAL recommendations)
Mount to board and and trim

Recommended SEAL materials: Self Adhesive Vinyl Solution

 Cold

 

Recommended SEAL Laminators

Image 62+

Image 62 Pro

SEAL 44 Ultra

 

Other suitable substrates

Foam PVC
Polystyrene
Card

 

Other Application Recommendations

Please refer to product data sheets for process setting and running conditions
Please refer to inkjet compatibility guide for printer and ink suitability