Seal Applications - Floor Graphics

The SEAL Floor Graphics System combines a slip and scuff resistant laminate with a removable adhesive. The laminate protects and enhances the image, whilst providing a suitable surface for foot traffic. The adhesive bonds to the floor surface during use, but can easily be removed within 30 days. This is the ideal solution for producing short term promotional floor signage.

How to Produce

This application is simply produced, using a one pass process using a hot or cold roller laminator

Application Media Suitability

1. Inkjet prints
2. Photographic
3. Litho prints

Using a SEAL roller laminator

1. Trim image to size
2. Apply adhesive and and overlaminate to the image to create a decal (sticker)
3. Trim to size leaving a 5mm border to stop moisture affecting the image
4. Apply to floor

Recommended SEAL materials: Inkjet Coated Media Solution

Top (Overlaminate)
Inkjet Print
Bottom (Adhesive)


 

Hot

 

 

Cold

 

Recommended Floor Surfaces

Vinyl
Marble
Varnished Wood
Tiled Flooring

Removing the Graphic from the Floor

The adhesive can easily be removed from the floor for up to 30 days after initial application If left down for a longer period of time, adhesive residue may remain on the floor surface, this can be removed using mild hydrocarbons (eg. White spirit)

Recommended SEAL Laminators

Image 62+

Image 62 Pro

SEAL 44 Ultra

Other Application Recommendations

Please refer to product data sheets for process setting and running conditions
Please refer to inkjet compatibility guide for printer and ink suitability