Epson Discproducer PP-100

Publishing speed (Burn and Print)
CD	30 discs/hour, Epson specified CD-R 600 MB data volume, writing speed: Drive max speed: 40 x
DVD	13 discs/hour, Epson specified DVD-R 3.8 GB data volume, writing speed: Drive max speed 12 x
Publishing modes (number of copies)
External output:	1 – 5, 2 stackers & pick-up tray used
Standard mode:	1 – 50, 2 stackers used (autom.)
Batch mode:	1 – 100, 3 stackers used
Print specifications
Print speed:	45 discs/hour, bidirectional, (Fast mode) 30 discs/hour, bidirectional, (Fine mode)
Print head:	Black ink 180 nozzles, Colour ink 180 nozzles x 5 colours
Print direction:	Bidirectional or uni-directional
Print resolution:	High-speed 1440 dpi x 720 dpi (Fast mode) High-resolution 1440 dpi x 1440 dpi (Fine mode)
Ink cartridge
Ink type:	Dye ink
Colours:	Cyan, Magenta, Yellow, Light cyan, Light magenta, Black
Capacity:	1000 discs or more (Ø 45 – 116 mm, 16,7 % colour sharing, continuous printing, mode setting: Fine)
Print area
Standard setting for outside diameter: Ø 116 mm Outside diameter setting range: Ø 70 – 119.4 mm Standard setting for inside diameter: Ø 45 mm Inside diameter setting range: Ø 18 – 50 mm Guaranteed print area: Ø 45 – 116 mm
CD/DVD drives
CD/DVD drives:	2 drives
Writing speed:	CD: Maximum 40 x DVD-R, DVD+R: Maximum 12 x DVD-R DL, DVD+R DL: Maximum 8 x
Supported Media
Size:	Outside diameter: Ø 120 mm ± 0.3 mm Inside diameter: Ø 15 mm + 0.1/-0 mm Thickness: 1.2 mm + 0.3/-0.1 mm
Form:	Supports common 12 cm (4.7 inch) discs Does not support specially-shaped discs
Type:	CD-R, DVD-R, DVD+R, DVD-R DL, DVD+R DL
Surface:	Printable (high quality or glossy) for glossy discs only Epson recommended is supported
External dimensions
Approximately 24 Kg (52.9 lb), including the stackers and ink cartridge, excluding the AC cable and discs
Mass
Width 377 mm, Depth 465 mm, Height 348 mm (Excluding the AC cable and USB cable
Software
Total Disc Maker: Installed to the user’s PC to publish discs Total Disc Monitor: Displays the status of JOBs and devices Total Disc Setup: Installed to user’s PC to make settings of PP-100 TD Bridge System incorporation tool to use the with other companies’ application Adjustment Tool for PP-100
Required IT-environment
OS: Windows XP SP2 or later, Home/Professional, Windows 2000 SP4 or later, Professional CPU: Pentium 4, 1.4 GHz or higher, Memory: 512 Mbytes or larger HDD: 10 Gbytes or larger, 7200 rpm or more Graphics environment: XGA or more, 65536 colors or more Sound environment: A sound device and a supported driver must be installed for music media USB 2.0 (High-speed) USB port: This product cannot be used in USB port of the PC equipped with some ATI's chipset as follows: ATI’s Southbridge IXP (SB)460 or earlier Individual published performance results may vary depending on processing capacity of PC
Interface
Universal Serial Bus Specifications Revision 2.0, Transmission speed: 480 Mbps (High-speed Device)
Electrical
Rated voltage: AC 100 V to AC 240, Frequency: 50 Hz to 60 Hz
Standards
CE Marking:	EMC Directive 2004/108/EC, EN55022 Class B, EN61000-3-2 EN6000-3-3, EN55024 Low Voltage Directve 2006/95/EC, EN60950-1 (TÜV)
Warranty
12 months incl. CD/DVD drives (Onsite)